Olympus KA-333 Audio Cable
Dub audio from a headphone or earphone output into a compatible microphone input with the Olympus KA-333 connecting cable.
- 1.5 m analogue audio cable
- Built-in attenuation for microphone-input recording
- 3.5 mm stereo plugs with a supplied 2.5 mm adapter
- Check socket type and recording levels before use
ANALOGUE AUDIO DUBBING
Record playback from another device
The Olympus KA-333 connects a source device’s headphone or earphone output to a compatible recorder’s microphone input. Play the original audio on one device while recording it on the other to make an analogue copy.
Attenuation for a microphone input
The cable contains built-in attenuation resistance to reduce the source signal for microphone-input recording. Its 1.5 m length and 3.5 mm stereo plugs provide a practical connection between compatible devices, with a supplied adapter for a suitable 2.5 mm socket.
- Designed for headphone-output-to-microphone-input dubbing
- 1.5 m cable with 3.5 mm stereo plugs
- Built-in signal attenuation
- 2.5 mm adapter included
Check both ends of the setup
Socket size alone does not establish compatibility. Check the input type, mono or stereo connection and recording settings on the receiving device. Start with a low playback volume and make a test recording, then adjust levels to avoid distortion.
This is an analogue recording connection rather than a USB file-transfer cable. Its attenuation also means it should not be treated as an ordinary unattenuated AUX cable.
Need to connect two audio devices?
Tell VoiceX the source and recording device models so we can help check the sockets and adapters required.
Olympus KA-333 specifications
- Type: analogue audio dubbing cable with built-in attenuation resistance
- Cable length: 1.5 m
- Cable connectors: 3.5 mm stereo male plugs at both ends
- Intended signal path: headphone or earphone output to compatible microphone input
- Included connection option: 2.5 mm adapter
The manufacturer instructions describe mono conversion adapters for particular input connections. Confirm the exact adapter set supplied by VoiceX if your setup needs a specific 3.5 mm or 2.5 mm mono connection.
Source and recording devices are sold separately.
Audio device compatibility
- The source needs a suitable analogue headphone or earphone output.
- The receiving device needs a compatible microphone input and a recording function.
- Check the required plug size, mono or stereo wiring and input settings. A 3.5 mm or 2.5 mm socket alone does not guarantee compatibility.
- A headphone-only socket cannot be used as the recording input.
Recording to a computer
Computer recording requires a suitable microphone input or audio interface and recording software. A headset combo socket may require an appropriate adapter; direct compatibility with every laptop or phone is not guaranteed.
Start playback and recording on the respective devices, then check a short sample for level and distortion before dubbing the full recording. The KA-333 does not provide digital file transfer or USB charging.
