The Philips LFH9172 conference microphone uses a boundary-layer design and 360° pickup to capture discussion around a meeting table. Connect it to a compatible voice recorder or powered microphone input, then position it near the participants.
Simple tabletop placement
The low-profile design sits directly on the table without a microphone stand. Integrated cable storage lets you keep unused cable tidy, with a 2 m lead for positioning the microphone where it is needed.
Omnidirectional pickup for voices around the microphone
Boundary-layer design intended for tabletop use
Built-in cable storage and length adjustment
Cascading socket for connecting additional compatible microphones
Plan the recording setup
The LFH9172 is an analogue microphone powered through its microphone connection. A headphone-only socket will not work. Computer use depends on the audio input, available plug-in power and any adapter required.
Additional microphones can help cover a larger table, but the supported arrangement depends on the recorder and recording channels. Room acoustics, background noise and speaker distance affect the result, so test the placement and levels before the meeting.
Check your meeting setup with VoiceX
Tell us your recorder or computer model, table size and planned number of microphones so we can help check the connections.
The LFH9172 needs a compatible microphone input supplying 1.5–5 V plug-in power. This low-voltage supply is not the same as 48 V studio phantom power. It is not a USB microphone.
Philips lists LFH9172 support for PocketMemo DPM6000 and DPM8000-series models including DPM8000, DPM8100, DPM8200, DPM8300 and DPM8500. It is also used in the DPM8900 meeting recording system.
Other PocketMemo and VoiceTracer recorders require a suitable external microphone input. Check the exact model and settings.
Not compatible with the VoiceTracer DVT2110: its 3.5 mm socket is headphone output only.
Philips identifies a 3-pole TRS connection for computer use. A headset combo port may need a suitable microphone/headphone splitter, and the microphone input must provide the required power.
Computer compatibility depends on the sound input or audio interface, adapter wiring and recording software. Do not assume direct compatibility with every Windows PC, Mac or laptop.
Using more than one microphone
The cascading socket supports multi-microphone setups, but the maximum number and wiring depend on the recorder and its recording channels. Check the instructions for the complete system or ask VoiceX before expanding it.
However, Dragon Medical One on it's own is not compatible with Mac. If you do not have a Helium subscription for Dragon Medical One you can consider one of the options below.
VMWare or Parallels® – These applications run a Windows operating system “virtually” within macOS. Any version of Dragon can then be installed on this virtual OS and natively control other Windows applications. Dictated text can be copied across platforms into applications running on macOS if required. Dragon Medical One (DMO) is particularly well suited to this approach since it is very lightweight so minimal resources need to be allocated to the Windows OS. Other Dragon versions (such as Dragon Professional & Dragon Legal) will also work this way, however, system resources must be considered. A Philips SpeechMike or other USB microphone can be used with this approach.
Read more about Parallels® Read more about VMWare
Windows Remote Desktop Service /Terminal Server or Citrix – If you connect to a Windows-based server, you can install some versions of Dragon on the server itself where it will be able to natively control other application on the server. PowerMic Mobile (only available for Dragon Medical One) is especially helpful here, as the server administrator may not otherwise allow the server to capture audio from a traditional microphone. This also relaxes the internet speed requirements, as high-definition audio need not be streamed to the server.
Read more about Windows Remote Desktop Service (Terminal Server) Read more about Citrix
Apple Boot Camp – This approach splits your Mac’s disk into two parts – one for macOS and one for Windows – allowing Windows applications like Dragon to be used as though your Mac were a Windows PC. Your macOS applications will not be available while running Windows, however, system resources are less of a concern as Windows will have access to all that is available. The virtual OS approach is still preferred where there are sufficient resources available to run both operating systems simultaneously.
Read more about Apple’s Boot Camp
The VoiceX Support Team will be more than happy to discuss your requirements and assist you with selecting the option that will best suit your needs and let you run Dragon Medical One on your Mac hardware.
How many computers can I install Dragon Medical on?
Choose the Dragon Medical One subscription that suits your practice.
Dragon Medical One Month-to-Month offers two options: an ongoing monthly subscription paid by direct debit, with cancellation required at least 7 days before the next billing cycle; or a 30-day subscription that expires automatically unless you instruct VoiceX to renew. For the 30-day option, VoiceX provides a renewal quote or advice 7 days before expiry.
Month-to-Month includes support and user assistance, rather than a dedicated training session.
All other Dragon Medical One subscriptions expire at the end of the purchased term unless you arrange renewal. They do not renew automatically.
Can I still buy Dragon Medical Practice Edition 4?
No. Dragon Medical Practice Edition 4 was discontinued in Australia in December 2020. The official Nuance support and maintenance period will only remain active until 31st December 2022. After this, we can not guarantee the reliability, security and operability of Dragon Medical Practice Edition 4.
We strongly recommend upgrading Dragon Medical Practice users to the latest speech recognition solution for medical professionals from Nuance - Dragon Medical One.
What is the latest version of Dragon Medical
Dragon Medical One.
Dragon Medical One is the latest in the Nuance suite of speech recognition technology. Dragon Medical One is a cloud-based speech recognition solution and has replaced the old, desktop software application - Dragon Medical Practice Edition 4.
You can buy Dragon Medical One in Australia from Australia's largest Nuance Certified Partner - VoiceX Communications.